Shop By Brand

Hangar Chat


  Tools - Punches, Dies, Taps
1 | 2  Next >
HAND THREAD PLUG TAPS

PLUG TAPS ­ used for ordinary threading and have a 3 to 5-thread chamfer, or relief, at the point.

Click here to view more details.
12-07601PLUG TAP LEFT HAND 6-32$4.40
12-07701PLUG TAP RIGHT HAND 6-32$2.60
12-07801PLUG TAP LEFT HAND 8-32$5.25
12-07901PLUG TAP RIGHT HAND 8-32$2.90
 Click here to view more parts like these.  
ROPER-WHITNEY METAL PUNCH NO. 5 JR HAND PUNCH

With one ton punching power. Punches 1/4 inch hole through 16 Ga. mild steel. Throat clearance 1-3/4

Click here to view more details.
12-01600ROP-WHITN. PUNCH #5 JR. KIT$89.90
ADEL HAND NIBBLING TOOL

Cuts sheet metal like punch and die. Cuts holes to any size and shape. Start with 7/16 inch hole then - nibble -to size required. Capacity 18 Ga. steel. Wt. 8 oz

Click here to view more details.
12-10400ADEL HAND NIBBLING TOOL$28.50
12-10500ADEL NIBBLING TOOL REPL PUNCH$14.75
ROUND KNOCK-OUT PUNCHES

Save hours of tedious drilling, sawing, filing and hand-fitting. Produce clean, true holes for sockets, controls, instruments. Cut clean, burr-free holes with these easy-to-use tools. Can be operated by ordinary wrench. One punch required for each hole size.

Click here to view more details.
12-20905PUNCH & DIE # 730 1/2"$46.75
12-20910KNOCK-OUT PUNCHES&DIE 730-5/8"$41.50
12-20915KNOCK-OUT PUNCHES&DIE 730BB3/4$42.75
12-20920PUNCH & DIE # 730 7/8"$38.85
12-20925ROUND KNOCK-OUT PUNCH 730-1"$49.75
 Click here to view more parts like these.  
STRAP DUPLICATOR
(BUSHING TYPE)

For drilling an accurate hole in overlapping sheets. The

Click here to view more details.
12-01494ECON 10 STRP DP BSH TYP 6 1/4$6.85
12-01495ECON 21 STRP DP BUSH TYP 6 1/4$6.85
12-01496ECON 30 STRP DP BUSH TYP 6 1/4$6.85
12-01497ECON 40 STRP DP BUSH TYP 6 1/4$6.85
12-01498ECON 1/4 STRP DP BSH TYP 6 1/4$6.85
 Click here to view more parts like these.  
STRAIGHT PUNCH & DIE SETS

For No. 5 Jr. punch. Punch and dimple in one operation. 3/32, 1/8 or 5/32 inch 100° punch and dimpling die sets.

Click here to view more details.
12-01800STRAIGHT PUNCH/DIE SET 3/32$16.25
12-01900STRAIGHT PUNCH/DIE SET 1/8$16.50
12-02000STRAIGHT PUNCH/DIE SET 5/32$16.50
12-02100STRAIGHT PUNCH/DIE SET 3/16$16.85
 Click here to view more parts like these.  
PUNCH AND FLANGING TOOL

When overlapping two pieces of sheet metal, you must “jog” the edge of one sheet so that they will join together seamlessly - and that’s just what this tool does. The jogging die places a nice 1/2” jogging flange on the edge of sheet metal up to 16ga. While the other end of the die contains a hole punch that will make a clean 3/16” hole. This tool is a real time-saver if you do a lot of sheet metal work.

Click here to view more details.
12-01413ATS PUNCH & FLANGING TOOL$75.95
CLECO PLIERS

Used in limited access areas, requires less travel per activation.

Click here to view more details.
12-01480ECON CLECO PLIERS$4.90
STRAP DUPLICATOR
(INVERTED TYPE)

For drilling an accurate hole in overlapping sheets. The inverted type duplicator allows you to locate a hole from the back of an overlaping sheet. #10? #21? #30? #40? 1/4" drill sizes, 6-1/4" or 13-1/4"

Click here to view more details.
12-01505ECON 10 STRP DP INV TYP 6 1/4$6.85
12-01506ECON 21 STRP DP INV TYP 6 1/4$6.85
12-01507ECON 30 STRAP DP INV TYP 6 1/4$6.85
12-01508ECON 40 STRAP DP INV TPY 6 1/4$6.85
12-01509ECON 1/4 STRP DP INV TYP 6 1/4$6.85
 Click here to view more parts like these.  
ADJUSTABLE ROUND SPLIT DIES

Adjustable Round Split Dies

Click here to view more details.
12-07001ADJ RND SPLIT DIES 6-32 L/H$10.75
12-07101ADJUSTABLE ROUND SPLIT DIES 8-32 LEFT HAND$10.75
12-07201ADJ. ROUND SPLIT DIE 10-32(L)$10.75
12-07301ADJUST. SPLIT DIES 1/4-28 LEFT$12.50
12-07401ADJUST SPLIT DIES 5/16-24 (LH)$12.50
 Click here to view more parts like these.  
SWIVEL DIMPLING TOOL 401 SHANK

SWIVEL DIMPLING TOOL 401 SHANK from Aircraft Spruce

Click here to view more details.
05-01234SM10SP 3/32 PUNCH DIMP TOOL$59.75
SM10SP-42641/8" PUNCH DIMP TOOL$60.25
SM10SP-4265SM10SP 5/32" PUNCH DIMP TOOL$52.75
SM10SD-4263SWIVEL DIMPLING TOOL 3/32$61.75
SM10SD-4264SWIVEL DIMPLING TOOL 1/8$57.75
DRIVE PIN PUNCHES

Click here to view more details.
12-00949AVERY 1/16" DRIVE PIN PUNCH$8.75
12-00870AVERY 3/32" DRIVE PIN PUNCH$7.50
12-00871AVERY 1/8" DRIVE PIN PUNCH$7.50
UTILITY TUNGSTEN CARBIDE TIP SCRIBER/ETCHING PEN

The power of our Utility Scriber and Etching Pen is eclipsed only by its affordability. This durable scriber is a terrific pickup for making quick and accurate marks in the hardest work pieces.

Click here to view more details.
12-01876SCRIBER CARBIDE TIP PEN 70088$3.60
THREAD REPAIR FILE

The Thread Repair Files help breathe life back into bolts, screws or fittings that have been damaged due to cross-threading or corrosion. Made of high carbon steel, the Repair Files offer eight different thread pitches. In addition, the Thread Repair Files can also be used as a screw pitch gage.

Click here to view more details.
12-01879RETHREAD FILE 1 7/16 177-1$10.95
UTILITY AUTOMATIC
CENTER PUNCH

The Utility Automatic Center Punch is our most economical model, offering a lightweight aluminum body and a hardened steel point. The punch is great for use on various metals and woods, and is impact adjustable.

Click here to view more details.
12-01874CENTER PUNCH AUTOMATIC 5/32$11.85
1-1/2 INCH HAND SQUEEZE YOKE

This yoke works with major brands of stainless steel squeezes, including Texas and Tatco.

Click here to view more details.
12-015471.5" YOKE ONLY$49.85
REVOLVING PUNCH

General's revolving punch plier is a convenient spring tension, self-opening tool for punching round holes in leather, plastic, rubber, canvas, cardboard and similar materials.

Click here to view more details.
72#72 REVOLVING HAND PUNCH$9.90
ARCH PUNCH SET

Our extensive selection of Arch Punches are machined to close tolerances for creating precise holes in gasket material, rubber and soft metals. These industrial-quality tools are hand forged to ensure the longevity and accuracy of the cutting edge.

Click here to view more details.
12-01891PUNCH SET 7PC ARCH STYLE 1271S$73.75
3-INCH CUT-OFF TOOL

The perfect tool for cutting and trimming studs & bolts. Features safety hood to protect against flying debris.

Click here to view more details.
12-01420ATS 3" CUT-OFF TOOL ATS8502$39.75
5PC EXTRA LONG
DRIVE PIN PUNCH SET

Our Drive Pin Punches have been machined to exacting tolerances for accurate driving without damaging the pin or hole. The punch ends are ground square to sit flush on the top of the pin.

Click here to view more details.
12-01875DRIVE PIN PUNCH KIT XLNG SPC76$29.85
KNOCKOUT PUNCHES FOR HIGH SHEAR RIVETS

Knockout Punches for High Shear Rivets .401 Shank

Click here to view more details.
12-01116KNOCK OUT PUNCH 1/8 .401 SHANK$7.75
12-01117PUNCH FOR HIGH-SHEAR RIV 5/32$19.85
12-01118PUNCH FOR HIGH-SHEAR RIV 3/16$19.85
12-01119PUNCH FOR HIGH-SHEAR RIV. 1/4$7.75
SPRING LOADED CENTER PUNCH

Spring loaded centre punch for 1/8 OR 3/32 and larger rivet heads. This spring loaded works great with universal aluminum head rivets, oval head and round head rivets.

Click here to view more details.
12-02464SPRING LOADED CENTRE PUNCH 1/8$34.95
12-02934SPRING LOAD CENTRE PUNCH 3/32$34.95
PLAIN TAP WRENCHES

Our standard Tap Wrenches are perfect for creating straight and accurate thread holes in your work piece. The fixed T-Handle provides a large gripping surface for generating maximum leverage. This versatile tool can also be used with reamers, drill bits, screw extractors and other hand-turned tools.

Click here to view more details.
12-01877TAP WRENCH PLAIN 2-3/4 164$12.25
12-01878TAP WRENCH PLAIN 3/34 166$14.75
26-16AWG DIE SET

26-16GA DIE SET FOR 30-506 (30-572) Die Set, Miniature Insulated Ring, Spade and Butt Splices, for Crimpmaster™ Crimp Tool Frame 30-506

Click here to view more details.
11-08689DIE SET 26-16 AWG FOR 30-500$46.75
DIE SET HEX FOR 30-484/30-506

Die set hex for 30-484/30-506

Click here to view more details.
11-08687SDIE SET HEX FOR THE 30-506$53.75
1 | 2  Next >